Digital Manual
Smart Blinds Motor

App Installation

Outsmart® app allows user to have all controls in one single app.

For Zigbee Smart Blinds Motor digital manual, click here

  • Download Outsmart App:
    • Visit the Google Play Store (for Android devices) or Apple App Store (for iOS devices)
    • Search for “Outsmart” and click the “Download” or “Get” button

  • Register Your Account:
    • Open the Outsmart app and follow the registration prompts
    • Create a new account with us to get started

  • Grant Necessary Permissions:
    • To ensure seamless connectivity, please grant the Outsmart app access to:
      • Notifications
      • Location
      • Wi-Fi
      • Bluetooth
  • Important Wi-Fi Configuration Note:
    Most smart home products, including this device, are compatible with Wi-Fi 2.4GHz networks only.
  • If you have a combined router:
    Please contact your telecom provider for assistance on how to disable Wi-Fi 5GHz to ensure proper connectivity.
  • Pre-Connection Checklist:
    Before adding your device, please ensure:
    ✓ Bluetooth is enabled on your mobile phone
    ✓ Wi-Fi is enabled on your mobile phone
    ✓ Your mobile phone is connected to your home Wi-Fi network (2.4GHz)
     

Product Introduction

Smart Blinds Motor
  • The smart blinds motor will not respond to any controls unless pairing is completed. This is because the motor needs to learn the limits and distance to operate effectively.

smart blind_1
Wifi Gateway
  • To connect the Wifi Gateway, plug it into a USB port. This will enable the smart blinds motor to be controlled via Wifi.
smart blind_2
Remote Controller 
  • The remote control will not function until the smart blinds motor is successfully connected to the app. This is because the motor needs to learn the limits and distance to operate effectively.
smart blind_3

Product Installation

Step 1: Ensure blinds motor has it full charge of 8 hours before proceeding to next step.


Step 2
: Remove blinds motor front top cover

Step 3: Use the suitable gear base on blinds beads/rope size, blinds motor will be unable to operate if wrong gear is used

Step 4: Hang blinds beads/rope on to gear

Step 5: Press blinds motor against the wall to push it down to ensure the blinds bead/rope is extremely tight !!  (very important step)

Step 6: Use a pencil to mark the installation placement of the back bracket

Step 7: Wipe down the installation area to ensure that wall has no dust and dirt before sticking on. This will ensure the stickiness of the 3M tape 

It is also recommended to press against the wall and leave the back plate on wall for 12 hours before letting the blinds motor sit on

Recommended to take this time to do a first charge for blinds motor before usage.

Reset Device

Step 1: Ensure blinds motor has it full charge of 8 hours before proceeding to next step.

Step 2: Mount the blinds motor onto the back bracket that is already installed on the wall.

Step 3: Plug in Wifi Gateway into a USB port, wait for 10 seconds, indicator light will start flashing, otherwise double click quickly

Step 4: Look for the power button underneath the blinds motor, click once, blue indicator light will flash one time

Step 5:  Product is now reset and ready to be added to app

Connect Device

  • Tap the (+) button located at the top right corner of the screen
    • Select Add Device
    • Ensure both Wi-Fi and Bluetooth are turned on on your mobile device

  • Auto-discovery
    • The app will automatically detect and display the device that is found

    • If auto-discovery fails, try resetting your device and ensure bluetooth is turned on

  • Ensure mobile phone is connected to your home 2.4ghz wifi only
  • Enter the correct password
  • Tap next and add 
  • Unsuccessful connection are usually because home wifi is not set to 2.4ghz

Set Limit

Smart blinds motor is required to learn how much distance to pull each open and close

Step 1: Ensure blinds is in fully closed position before pressing any button, if you have already press anything prior, you will need to Reset Device again 

Step 2: Tap start to learn

Step 3: Once blinds reaches its fully opened position, tap on stop learning

Step 4: Done! Now you can control it from app, manual, and remote. Voice control is available for user with voice assistance 

user may accidentally unbind the motor with gateway during the reset. Follow the step in the video below to pair it back, ensure blinds motor has its full charge before binding

if user remote is unable to control the motor right away, follow the video below to bind the remote with motor

Remember to tag us when you post them on social media!

FAQ

I can’t connect the product, it gets timed out.

Ensure phone is connected to 2.4ghz wifi only, ensure wifi password is accurate and product position is not too far from router

How far should the gateway to blinds motor

To ensure seamless usage, it is recommended to keep Wifi Gateway as close as possible, this way the motor is able to report back to the wifi gateway on battery percentage accurately and run automation seamlessly