Digital Manual
Smart Table Lamp

App Installation​

Manage and control all your smart devices conveniently in one app.

  • Download Smartlife App:
    • Visit the Google Play Store (for Android devices) or Apple App Store (for iOS devices)

    • Search for “Smartlife” and click the “Download” or “Get” button

  • Register Your Account:
    • Open the Smartlife app and follow the registration prompts

    • Create a new account to get started

  • Grant Necessary Permissions:
    • To ensure seamless connectivity, please grant the Smartlife app access to:
      • Notifications
      • Location
      • Wi-Fi
      • Bluetooth
  • Important Wi-Fi Configuration Note:
    Most smart home products, including this device, are compatible with Wi-Fi 2.4GHz networks only.
  • If you have a combined router:
    Please contact your telecom provider for assistance on how to disable Wi-Fi 5GHz to ensure proper connectivity.
  • Pre-Connection Checklist:
    Before adding your device, please ensure:
    ✓ Bluetooth is enabled on your mobile phone
    ✓ Wi-Fi is enabled on your mobile phone
    ✓ Your mobile phone is connected to your home Wi-Fi network (2.4GHz)
     

Activate Device

Connect the USB cable and LED strip into the control box.

Diagram-768x768

Device Pairing

Long press the On/Off button for 10 seconds and release, the device will be reset and is ready to be paired when the LED strips flashes.

Connector-768x451
  • Tap the (+) button located at the top right corner of the screen
    • Select Add Device

    • Ensure both Wi-Fi and Bluetooth are turned on on your mobile device

  • Auto-discovery

    • The app will automatically detect and display the device that is found

    • If auto-discovery fails, try resetting your device and ensure bluetooth is turned on

  • Ensure mobile phone is connected to your home 2.4ghz wifi only
  • Enter the correct password
  • Tap next and add 
  • Unsuccessful connection are usually because home wifi is not set to 2.4ghz
how to activate

Voice Assistance

tap on image below for video tutorial

Remember to tag us when you post them on social media!

FAQ

I can’t connect the product, it gets timed out.

wifi password is accurate and product position is not too far from router

Product is not blinking.

Switch on and off the main power socket for 5 times slowly, with an interval of 2 second each time

Remote is not responsive

Strip has to be connected to phone in order for remote controller to work well. Ensure the IR receiver is protruding out to receive signal from remote

Product got disconnected after awhile

Ensure the power plug has 2A output and not sharing of usb port, so that product have enough power supply.

How can i control with my voice using Google Home and Alexa

You need to bind the app together first in order to allow smart ai voices to locate the devices.